Horizontal Soft Bearing Balancing Machine BM-3000
Universal soft bearing balancing machine for highly precise balancing of a wide spectrum of rotors with masses 30 - 3000 kg.
The most popular is a machine of BM-3000 model. Since 1995 more than 150 machines total of this model have been produced.
The BM-3000 machine is widely used at thermal power stations for the balancing of various equipment: different pumps and electric motors, at locomotive repair plants and depots for balancing of driving motor armatures.
Balancing machines of models BM-3000 and BM-8000 are established at each Gazprom compressor station.
DIAMECH universal balancing machines series BM are ideal for one-off rotors and for small batches.
Features
- Highest balance sensitivity, 0.1 g·mm/kg
- Anti-friction bearing work supports eliminate time-consuming alignment procedures. Bearings have a flat, wide-contact surface to carry rotors without damaging journals,
- Balance at lower and safer speeds,
- The machine installed without foundations, no expensive construction of special concrete foundations required,
- Transportable,
- Special screw-jacks for loading heavy rotors on the balancing machine,
- Automatic additional turn of a rotor on a required angle,
- Touch screen balancing computer, with all accessories needed for balancing,
- The highest quality of manufacturing
Standard Specifications
|
|||
Max. rotor weight, kg
|
3000
|
||
Min. rotor weight, kg
|
30
|
||
Max. rotor diameter, mm
|
2300
|
||
Distance between the centers of rotor bearing journals, mm
|
350...2630
|
||
Shaft journal diameter range, mm
|
20...380
|
||
Sensitivity, g·mm/kg
|
0.1
|
||
Balancing speed, rev/min
|
from 300
|
||
Drive Motor
|
AC 5.5 kW
|
||
Drive Type
|
Belt (standard)
Belt+End (option)
|
||
Speed sensor
|
Laser
|
||
Instrumentation
|
Touch screen
balancing computer
|
||
Standard Base length, mm
|
3000
|
||
Machine weight, kg
|
1500
|
||
Guarantee
|
12 month
|
||
Specifications are for standard machines; modifications are available to meet specific requirements.
|
|||
Standard Configurations
- Machine Bed
- 2 pedestals
- 2 roller work supports
- 2 special screw-jacks for loading heavy rotors on the balancing machine
- AC 5.5 kW Drive Motor
- Control console with touch screen balancing computer, with all cables
- 2 Vibration sensors
- Laser speed sensor
- Angle sensor
- 2 Flat drive belts
All about balancing machines
DIAMECH 2000
|
||
phone: +7 (495) 223-04-20
fax: +7 (495) 223-04-90
e-mail: contact@diamech.ru
|
||
DIAMECH 2000: Vibration Diagnostic and Balancing Machines
Since 1989
Vibration Diagnostic and Balancing Machines
